|
| General |
General
How do I get the best quality of cut from my mower?
To obtain the best quality of cut:
• Make sure the blade is sharp (for best results, replace or sharpen yearly or when needed).
• Operate the machine at full throttle.
• Cut only 1/3 of the grass blade at a time.
• Mow only dry grass or leaves. If the finished lawn appearance is unsatisfactory, try one or more of the following:
• Slow down the ground speed of the unit.
• Raise the cutting height on your mower deck.
• Cut the grass more frequently.
• Overlap the cutting swaths instead of cutting a full swath with each pass.
• Alternate mowing direction to keep the grass standing straight - this helps disperse clippings, which enhances decomposition and fertilization.
• Clean the clippings and dirt from the underside of the mower deck after each use. (Grass build up inside the mower will affect cutting quality.) For more Tips, visit our Quality of Cut Interactive Manual. .
Where can I buy parts or get my mower serviced?
Toro and TyCrop parts are sold exclusively through Parkland Products and our network of Toro Authorized Service Dealers. Click here to find the closest dealer near you. Where can I find warranty information on my product?
For information regarding Toro's industry leading warranty on your product's warranty coverage, please refer to the last page in your Operator's Manual Where can I get a replacement owner's manual or parts catalogue for my mower?
A majority of our Owner's Manuals and Parts Manuals are available to request or download online. To obtain the correct manual, you will need the model and serial number of your machine and then contact us by clicking here Where can I get a user guide or manual for my POPE garden watering product?
|
Service Bookings