Low slung design built for smaller properties where the terrain is sloping or undulating

Climber Ride On Mower 7.18

Model: Climber 7.18

The Climber 7.18 is generally best used on smaller properties up to 3 – 4 acres. With plenty of engine power, travelling up and down steep slopes is easy even while mowing long grass.

  • Ultimate safety which minimises risk
  • Tackles tricky, hard-to-reach spots
  • Gets the job done – fast!

Price excludes shipping and dealer pre-delivery.

The Climber Ride On Mower 7.18 is also commonly known as: CL7.18, CL718, CL 7.18, CL 718, Climber 7.18, Climber 718, Ride-on mower, rideonmower, grilloclimber, grillo climber



TALK TO A REP

FIND A DEALER

SKU: 88W5P Categories: ,

Description

The Grillo Climber 7 Series range can safely climb slopes and is very efficient in maintaining overgrown, neglected areas, agricultural areas and lawns. The extreme maneuverability, smooth steering and speed enable the machine to work quickly and efficiently while remaining simple and easy to control.

If a rougher application is needed, then the heavier nine series models may be a better fit such as the 9.18 or 9.22 climbers.

The single-blade cutter deck has a cutting width of 34″ (85 cm) and a quality built Briggs and Stratton 18HP V-Twin cylinder engine. With plenty of engine power, travelling up and down steep slopes is easy – even while mowing long grass.

The Climber 7.18 has a hydrostatic gearbox which uses hydraulic oil to provide the motive link between the engine and the wheels – all controlled by a simple hand lever.

The 7.18 has dependable front drum brakes not available on other machines, this allows the operator to brake when mowing downhill and increases safety in case of emergency stopping.

Differential locking increases traction by engaging both drive wheels simultaneously when slipping occurs.  This allows the Climber to mow in dry or slippery conditions and cover rough ground where other mowers struggle.

WARRANTY OPTIONS:
Commerical
Non-Commerical
Rental/Hire

Ultimate Ergonomic Comfort

The Climber range features plenty of leg room obtained via a low adjustable two position footrest. With feet placed at an optimum angle to upkeep maximum safety, the smooth operating drive lever and the steering wheel are close in reach. The comfortable, adjustable & dampened seat is fitted with armrests that retain the operator while working slopes. Say farewell to any fatigue created from extended working periods!

Robust & Durable

The robust structure of the cutting deck is able to handle stones and other type of debris with no problem. The large diameter blade and the cutter deck’s drive system ensure reliability under heavy working conditions over long periods.

Compact & Low to the Ground

With a low centre of gravity and optimal weight distribution, the Climber 7.18 has been designed to obtain maximum stability and maximum safety for the operator. This makes the machine ideal for work under low positioned branches or other obstacles without compromising a beautiful finish.

Electric Blade Engagement by Push-Button

A convenient push-button is placed close to the steering wheel to engage the blades. The cutting height is then simply regulated direct from the driver’s seat by a hand-held lever with 6 cutting positions.

  • Engine: Briggs & Stratton Intek 7180 V TWIN cylinder
  • Engine HP: 18 HP
  • Displacement: 656 cc
  • Starter: Electric, 12V Battery
  • Gearbox: Hydrostatic Transmission
  • Cutting Width: 85 cm
  • Cutting Height: 3.5-8.5 cm, 6 positions
  • Discharge: Rear
  • Fuel Tank: 7 L
  • Dimensions L x W x H: 189.5 cm x 95 cm x 97.5 cm
  • Weight: 255 kg
  • Includes:Differential lock, Front Brakes and Anti-Puncture Front Wheels

Go to Top