Climber Ride On Mowers

>>>Climber Ride on Mower 7.13

Climber Ride on Mower 7.13

$8,990.00

Model: Climber 7.13

The Climber 7.13 is generally used on smaller properties around 1 – 2 acres and where the terrain underfoot is smoother and therefore the machine can be a lighter build than the heavier nine series models which suit rougher applications.

While this machine can work well in lighter applications if a lot of work on very steep slopes is required then a 7.16 with more power can be a better option.

Price excludes shipping and dealer pre-delivery.


BROCHURE TALK TO A REP

FIND A DEALER

SKU: 89WBE Categories: ,

Description

The Climber 7.13 is generally used on smaller properties around 1 – 2 acres and where the terrain underfoot is smoother and therefore the machine can be a lighter build than the heavier nine series models which suit rougher applications.

While this machine can work well in lighter applications if a lot of work on very steep slopes is required then a 7.16 with more power can be a better option.

This machine has a 34″ (85cm) cutting width and a 13.5HP engine.

The Climber 7.13 will tackle terrain and long grass that other mowers can’t cope with and allow you to mow safely in damp and slippery conditions.

This machine has a hydrostatic gearbox which uses hydraulic oil to provide the motive link between the engine and the wheels.  No gears = increased reliability.

The 7.13 has dependable front drum brakes not available on other machines which allow you to brake the mower when mowing downhill and increases safety in case of emergency stopping.

Differential locking increases traction by engaging both drive wheels simultaneously when slipping occurs.  This allows the Climber to mow when slippery or dry and over rough ground where other mowers struggle.

WARRANTY OPTIONS:
Commerical
Non-Commerical
Rental/Hire

Safe Mowing on Slopes

The Climber 7.13 is generally used on smaller properties around 1 – 2 acres and where the terrain underfoot is smoother and therefore the machine can be a lighter build than the heavier nine series models which suit rougher applications.

While this machine can work well in lighter applications if a lot of work on very steep slopes is required then a 7.16 with more power can be a better option.

This machine has a 34″ (85cm) cutting width and a 13.5HP engine.

The Climber 7.13 will tackle terrain and long grass that other mowers can’t cope with and allow you to mow safely in damp and slippery conditions.

This machine has a hydrostatic gearbox which uses hydraulic oil to provide the motive link between the engine and the wheels.  No gears = increased reliability.

The 7.13 has dependable front drum brakes not available on other machines which allow you to brake the mower when mowing downhill and increases safety in case of emergency stopping.

Differential locking increases traction by engaging both drive wheels simultaneously when slipping occurs.  This allows the Climber to mow when slippery or dry and over rough ground where other mowers struggle.

 

 

  • Engine: Briggs & Stratton: 13HP Intek OHV
  • Economy: 3.1 lt/hr
  • Starter: Electric, 12V Battery
  • Gearbox: Hydrostatic Transmission
  • Differential with locking device
  • Clutch: electromagnetic clutch with blade brake
  • Speed Forward: 0 – 9 km/hr
  • Speed Reverse: 0 – 4 km/hr Tyres Front 13×5.00-6 Tyres Rear 16×6.50-8
  • Brakes: Front emergency & rear parking brake
  • Seat: Sprung & adjustable
  • Cutting Deck: Rear discharge
  • Cutting System
  • Central bar with swing tip blades
  • Cutting Width: 850mm Blade Tip Speed 76 m/sec
  • Cutting Height: 6 positions from 35-85mm 1 travel position
  • Hourly Cutting Capacity: 4800 m2/hr approx
  • Internal Steering Radius: 450mm
  • Fuel Tank: 7 lt inc 1 lt emergency supply
  • Front headlight
  • Length 1895mm
  • Width 950mm
  • Height 975mm
  • Weight 225 kg