Low slung design built for smaller properties where the terrain is sloping or undulating

>>>Climber Ride On Mower 7.18

Climber Ride On Mower 7.18

$10,790.00

Model: Climber 7.18

The CL7.18 has a 34″ (85cm) cutting width and an 18HP V-Twin cylinder engine. This machine will tackle terrain and long grass that other mowers can’t cope with and allow you to mow safely in damp and slippery conditions. With plenty of engine power, travelling up and down steep slopes is easy even while mowing long grass.

Price excludes shipping and dealer pre-delivery.


BROCHURE TALK TO A REP

FIND A DEALER

SKU: 88W5P Categories: ,

Description

The CL7.18 has a 34″ (85cm) cutting width and an 18HP V-Twin cylinder engine. This machine will tackle terrain and long grass that other mowers can’t cope with and allow you to mow safely in damp and slippery conditions. With plenty of engine power, travelling up and down steep slopes is easy even while mowing long grass.

CL7.18 has a hydrostatic gearbox which uses hydraulic oil to provide the motive link between the engine and the wheels – all controlled by a simple hand lever. The CL7.18 has dependable front brakes not available on other machines which allow you to brake the mower when mowing downhill and increases safety in case of emergency stopping.Differential locking increases traction by engaging both drive wheels simultaneously when slipping occurs.  This allows the Climber to mow when slippery or dry and over rough terrain where other mowers struggle.

WARRANTY OPTIONS:
Commerical
Non-Commerical
Rental/Hire

Safe Mowing on Slopes

The Climber 7.18 is generally used on medium sized properties up to 3 – 4 acres and where the terrain underfoot is smoother and therefore the machine can be a lighter build than the heavier nine series models which suit rougher applications.

This machine has a 34″ (85cm) cutting width and 18 hp V-Twin cylinder engine.

The Climber 7.18 will tackle terrain and long grass that other mowers can’t cope with and allow you to mow safely in damp and slippery conditions.
With more engine power than the smaller 7.13 model, travelling up and down steep slopes is easy even while mowing long grass.

This machine has a hydrostatic gearbox which uses hydraulic oil to provide the motive link between the engine and the wheels.  No gears = increased reliability.

The 7.18 has dependable front brakes not available on other machines which allow you to brake the mower when mowing downhill and increases safety in case of emergency stopping.

Differential locking increases traction by engaging both drive wheels simultaneously when slipping occurs.  This allows the Climber to mow when slippery or dry and over rough ground where other mowers struggle.

Now you can let it grow even over a meter high before you need to head out again – mow when you want to – not when tough conditions dictate!

  • Engine: Briggs & Stratton Intek 7180 18hp V TWIN cylinder
  • Economy: 3.5 lt/hr
  • Starter: Electric, 12V Battery
  • Gearbox: Hydrostatic Transmission
  • Differential with locking device
  • Clutch: V-belt for P.T.O
  • Speed Forward: 0 – 9 km/hr
  • Speed Reverse: 0 – 4 km/hr
  • Tyres: Front 13×5.00-6
  • Tyres: Rear 16×6.50-8
  • Brakes: Front emergency & rear parking brake
  • Seat: Sprung & adjustable
  • Cutting Deck: Rear/side discharge

Cutting System

  • Central bar with swing tip blades
  • Cutting Width: 850mm (34″)
  • Blade Tip Speed: 70 m/sec
  • Cutting Height: 6 positions from 35-85mm, one travel position
  • Hourly Cutting Capacity: 6000 m2/hr approx
  • Internal Steering Radius: 485mm
  • Fuel Tank: 7 lt inc 1 lt emergency supply
  • Front headlight
  • Length: 1895mm
  • Width: 950mm
  • Height: 975mm
  • Weight: 253 kg