Toro Greensmaster Triflex 3300 Ride On Mower
Model 04510
- Deck150cm
- Power TypePetrol
Showing all 4 results
Compare the models
| Specification |
|
|
|
|
|---|---|---|---|---|
| Model | Toro Greensmaster Triflex 3300 Ride On Mower | Toro Greensmaster Triflex 3320 | Ride On Mower | Toro Greensmaster Triflex 3400 | Ride On Mower | Toro Greensmaster® Triflex 3420 | Ride On Mower |
| Featured specs | ||||
| Power Train (Engine Description) |
Briggs & Stratton® Vanguard®, 23 HP (17.2 kW) @ 3600 rpm, 2-cylinder, air-cooled, gasoline engine, governed to 2920 high idle, 1650 rpm low idle. Displacement: 38.3 cu-in. (627 cc) |
Briggs & Stratton® Vanguard® 23hp (17.2kW) @3600 rpm, 2-cylinder, air cooled, gasoline engine governed to 2920 rpm high idle, 1650 rpm low idle. Displacement: 38.3 cu-in. (627 cc) |
Kubota® D902, Tier 4i, 24.8 HP (18.5 kW) @ 3600 rpm, 3-cylinder, liquid-cooled, diesel engine, governed to 2880 high idle, 1560 rpm low idle. Displacement: 55.0 cu-in. (902 cc) |
Kubota® D902, Tier 4i, 24.8 HP (18.5 kW) @ 3600 rpm, 3-cylinder, liquid-cooled, diesel engine, governed to 2880 high idle, 1560 rpm low idle. Displacement: 55.0 cu-in. (902 cc) |
| Fuel Type |
Gasoline |
Hybrid - Gas |
Diesel |
Hybrid - Diesel |
| Cutting Width | 150 cm (59") | 150 cm (59") | 150 cm (59") | 150 cm (59") |
| Number of Blades |
11, 14, 8 |
11, 14, 8 |
11, 14, 8 |
11, 14, 8 |
| Reel/Cylinder Drive |
Hydraulic |
Electric |
Hydraulic |
Electric |
| Weight |
526 kg (1,161 lbs.) |
570 kg (1,257 lbs.) |
586 kg (1,286 lbs.) |
638 kg (1,406 lbs.) |
| Engine & Drivetrain | ||||
| Cooling System |
Air Cooled |
Air Cooled |
Radiator cooled with 12-volt electric fan |
Radiator is cooled by 12-volt electric fan. |
| Fuel Capacity |
6 U.S. gal. (22.7 L) |
6 U.S. gal. (22.7 L) |
6 U.S. gal. (22.7 L) |
6 U.S. gal. (22.7 L) |
| Start Type |
Key Start |
Key Start |
Key Start |
Key Start |
| Drivetrain | Gas | Hybrid | Diesel | Hybrid |
| Battery | ||||
| Battery | 12V | 12V | 12V | 12V |
| Cutting System | ||||
| Blade Type (Description) |
Reels are 13 cm (5") in diameter, 53.3 cm (21") in length. EdgeSeries™ Reels blades are welded to 5 stamped steel spiders, and heat treated. The reel is ground for diameter and concentricity, and relief ground. The reel weldment shaft is a 35 mm (1.375") diameter tube with internally splined threaded insert. Two stainless steel ball bearings (30 mm inside diameter) slip fit onto reel shaft retained by internally splined threaded insert. Low drag seals/slingers for added protection with o-ring sealed motor and counterweight. Reel position maintained by a wave washer with no adjusting nut. |
Reels are 13 cm (5") in diameter, 53.3 cm (21") in length. EdgeSeries™ Reels blades are welded to 5 stamped steel spiders, and heat treated. The reel is ground for diameter and concentricity, and relief ground. The reel weldment shaft is a 35 mm (1.375") diameter tube with internally splined threaded insert. Two stainless steel ball bearings (30 mm inside diameter) slip fit onto reel shaft retained by internally splined threaded insert. Low drag seals/slingers for added protection with o-ring sealed motor and counterweight. Reel position maintained by a wave washer with no adjusting nut. |
Reels are 13 cm (5") in diameter, 53.3 cm (21") in length. EdgeSeries™ Reels blades are welded to 5 stamped steel spiders, and heat treated. The reel is ground for diameter and concentricity, and relief ground. The reel weldment shaft is a 35 mm (1.375") diameter tube with internally splined threaded insert. Two stainless steel ball bearings (30 mm inside diameter) slip fit onto reel shaft retained by internally splined threaded insert. Low drag seals/slingers for added protection with o-ring sealed motor and counterweight. Reel position maintained by a wave washer with no adjusting nut. |
Reels are 13 cm (5") in diameter, 53.3 cm (21") in length. EdgeSeries™ Reels blades are welded to 5 stamped steel spiders, and heat treated. The reel is ground for diameter and concentricity, and relief ground. The reel weldment shaft is a 35 mm (1.375") diameter tube with internally splined threaded insert. Two stainless steel ball bearings (30 mm inside diameter) slip fit onto reel shaft retained by internally splined threaded insert. Low drag seals/slingers for added protection with o-ring sealed motor and counterweight. Reel position maintained by a wave washer with no adjusting nut. |
| Blade Design | Reel | Reel | Reel | Reel |
| Height of Cut Range |
Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 1.6 - 7.5 mm (0.062" - 0.297"). With high HOC kit, range is 7.5 - 25.4 mm (0.297" - 1.0"). Effective HOC may vary depending on turf conditions and bedknife installed. |
Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 1.6 - 7.5 mm (0.062" - 0.297"). With high HOC kit, range is 7.5 - 25.4 mm (0.297" - 1.0"). Effective HOC may vary depending on turf conditions and bedknife installed. |
Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 1.6 - 7.5 mm (0.062" - 0.297"). With high HOC kit, range is 7.5 - 25.4 mm (0.297" - 1.0"). Effective HOC may vary depending on turf conditions and bedknife installed. |
Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 1.6 - 7.5 mm (0.062" - 0.297"). With high HOC kit, range is 7.5 - 25.4 mm (0.297" - 1.0"). Effective HOC may vary depending on turf conditions and bedknife installed. |
| Clip Frequency/Backlapping |
Adjustable automatic clip control up to 2050 RPM at 2850 engine RPM. Backlapping standard. |
Adjustable automatic clip control up to 2050 RPM at 2850 engine RPM. Backlapping standard. |
Approximately 2050 RPM at 2850 engine RPM. Adjustable. Backlapping standard. |
Adjustable automatic clip control up to 2050 RPM at 2850 engine RPM. Backlapping standard. |
| Cutting Unit Type/Configuration |
Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented) |
Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented) |
Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented) |
Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented) |
| Cutting Unit Accessories |
8, 11, 14-Blade Cutting Unit, Roller Options, Roller Scrapers / Brushes / Combs Options, Bedknife and Bedbar Options, Tools and Maintenance Options. |
8, 11, 14-Blade Cutting Unit, Roller Options, Roller Scrapers / Brushes / Combs Options, Bedknife and Bedbar Options, Tools and Maintenance Options. |
8, 11, 14-Blade Cutting Unit, Roller Options, Roller Scrapers / Brushes / Combs Options, Bedknife and Bedbar Options, Tools and Maintenance Options. |
8, 11, 14-Blade Cutting Unit, Roller Options, Roller Scrapers / Brushes / Combs Options, Bedknife and Bedbar Options, Tools and Maintenance Options. |
| Rollers |
Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller. Rear: Steel full, 5.1 cm (2") diameter with sealed bearings and through-shaft. |
Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller. Rear: Steel full, 5.1 cm (2") diameter with sealed bearings and through-shaft. |
Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller. Rear: Steel full, 5.1 cm (2") diameter with sealed bearings and through-shaft. |
Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller. Rear: Steel full, 5.1 cm (2") diameter with sealed bearings and through-shaft. |
| Grass Distribution |
Non-adjustable shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions. |
Non-adjustable shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions. |
Non-adjustable shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions. |
Non-adjustable shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions. |
| Reel Diameter |
12.7cm (5 in.) |
12.7cm (5 in.) |
12.7cm (5 in.) |
12.7cm (5 in.) |
| Bedknife |
Replaceable single-edged EdgeMax™ Microcut Bedknife is standard. |
Replaceable single-edged EdgeMax™ Microcut Bedknife is standard. |
Replaceable single-edged EdgeMax™ Microcut Bedknife is standard. |
Replaceable single-edged EdgeMax™ Microcut Bedknife is standard. |
| Bedknife Adjustment |
Dual screw, indexed “click” adjustment to the reel; detents corresponding to 0.018 mm (0.0007") bedknife movement for each position. |
Dual screw, indexed “click” adjustment to the reel; detents corresponding to 0.018 mm (0.0007") bedknife movement for each position. |
Dual screw, indexed “click” adjustment to the reel; detents corresponding to 0.018 mm (0.0007") bedknife movement for each position. |
Dual screw, indexed “click” adjustment to the reel; detents corresponding to 0.018 mm (0.0007") bedknife movement for each position. |
| Traction & Steering | ||||
| Traction Drive | 2WD | 2WD | 2WD | 2WD |
| Traction Drive (System) |
2WD parallel hydrostatic or optional 3WD series-parallel piston pump closed loop system. Foot pedal forward and reverse; infinitely variable. |
2WD parallel hydrostatic or optional 3WD series-parallel piston pump closed loop system. Foot pedal forward and reverse; infinitely variable. |
2WD parallel hydrostatic or optional 3WD series-parallel piston pump closed loop system. Foot pedal forward and reverse; infinitely variable. |
2WD parallel hydrostatic or optional 3WD series-parallel piston pump closed loop system. Foot pedal forward and reverse; infinitely variable. |
| Tyres - Front |
19" x 10.5" - 8", 4-ply, Smooth Tread |
19" x 10.5" - 8", 4-ply, Smooth Tread |
19" x 10.5" - 8", 4-ply, Smooth Tread |
19" x 10.5" - 8", 4-ply, Smooth Tread |
| Tyres - Rear |
19" x 10.5" - 8", 4-ply, Smooth Tread |
19" x 10.5" - 8", 4-ply, Smooth Tread |
19" x 10.5" - 8", 4-ply, Smooth Tread |
19" x 10.5" - 8", 4-ply, Smooth Tread |
| Forward Ground/Transport Speed |
0 - 16.1 km/h (0 - 10 mph) |
0 - 16.1 km/h (0 - 10 mph) |
0 - 16.1 km/h (0 - 10 mph) |
0 - 16.1 km/h (0 - 10 mph) |
| Mowing Speed |
0 - 8 km/h (0 - 5 mph) |
0 - 8 km/h (0 - 5 mph) |
0 - 8 km/h (0 - 5 mph) |
0 - 8 km/h (0 - 5 mph) |
| Steering System Description |
No-tool quick adjust steering arm position with power assist allowing a wide range of operator sizes. Steering cylinder has a through shaft design for precise straight line tracking. |
No-tool quick adjust steering arm position with power assist allowing a wide range of operator sizes. Steering cylinder has a through shaft design for precise straight line tracking. |
No-tool quick adjust steering arm position with power assist allowing a wide range of operator sizes. Steering cylinder has a through shaft design for precise straight line tracking. |
No-tool quick adjust steering arm position with power assist allowing a wide range of operator sizes. Steering cylinder has a through shaft design for precise straight line tracking. |
| Power Steering |
Yes |
Yes |
Yes |
Yes |
| Parking/Service Brakes |
Hand-actuated parking brake lever with two 15.2 cm (6") diameter drum brakes mounted on the front wheel motors. |
Hand-actuated parking brake lever with two 15.2 cm (6") diameter drum brakes mounted on the front wheel motors. |
Hand-actuated parking brake lever with two 15.2 cm (6") diameter drum brakes mounted on the front wheel motors. |
Hand-actuated parking brake lever with two 15.2 cm (6") diameter drum brakes mounted on the front wheel motors. |
| Controls |
Ignition: Off/Run/Start. Throttle: Low - High Idle. Choke (AC only): Opens / Closes choke plate. Parking Brake: Off - On. Traction Pedal: Rev/Neutral/Forward Joystick: Raises/lowers reels also tap off feature for clean up pass. Functional Control Lever sets neutral/mow/transport limits for traction pedal. Diagnostic Light: Indicates system faults to assist in resolving issues. |
Ignition: Off/Run/Start. Throttle: Low - High Idle. Choke: Open / closes choke plate. Parking Brake: Off - On. Traction Pedal: Rev/Neutral/Forward Joystick: Raises/lowers reels also tap off feature for clean up pass. Functional Control Lever sets neutral/mow/transport limits for traction pedal. InfoCenter™ Diagnostics standard. |
Ignition: Off/Run/Start. Throttle: Low - High Idle. Choke (AC only): Open /Closes choke plate. Parking Brake: Off - On. Traction Pedal: Rev/Neutral/Forward Joystick: Raises/lowers reels also tap off feature for clean up pass. Functional Control Lever sets neutral/mow/transport limits for traction pedal. Diagnostic Light: Indicates system faults to assist in resolving issues. |
Ignition: Off/Run/Start. Throttle: Low - High Idle. Choke (AC only): Open / closes choke plate. Parking Brake: Off - On. Traction Pedal: Rev/Neutral/Forward Joystick: Raises/lowers reels also tap off feature for clean up pass. Functional Control Lever sets neutral/mow/transport limits for traction pedal. InfoCenter™ Diagnostics standard. |
| Hydraulics | ||||
| Hydraulic Fluid Capacity |
6.8 U.S. gal. (25.7 L) |
5.5 U.S. gal. (20.8 L) |
6.8 U.S. gal. (20.8 L) |
5.5 U.S. gal. (20.8 L) |
| Leak Detection |
Standard Turf Guardian™ Leak Detection System. System sounds an alarm and turns on a warning light with the loss of 3-5 oz. of hydraulic fluid. |
Equipped with Turf Guardian™ Leak Detection System. System sounds an alarm and turns on a warning light with the loss of 3-5 oz. of hydraulic fluid. |
Optional Turf Guardian™ Leak Detection System. System sounds an alarm and turns on a warning light with the loss of 3-5 oz. of hydraulic fluid. |
Optional Turf Guardian™ Leak Detection System. System sounds an alarm and turns on a warning light with the loss of 3-5 oz. of hydraulic fluid. |
| Implement Drive |
Single gear pump, valve block, series reel drive to 3 reel motors. |
48V-5400 watt air-cooled brushless permanent magnet generator in parallel with 48V 9Ah battery set powers three 48V-1100 watt brushless permanent magnet reel motors with separable controller. 4-12V 9Ah sealed, maintenance-free, VRLA batteries. 48-volt system is isolated from 12-volt including the frame/chassis. |
Single gear pump, valve block, series reel drive to 3 reel motors. |
48V-5400 watt air-cooled brushless permanent magnet generator in parallel with 48V 9Ah battery set powers three 48V - 1100 watt brushless permanent magnet reel motors with separable controller. 4-12V 9Ah sealed, maintenance-free, VRLA batteries. 48-volt system is isolated from 12-volt including the frame/chassis. |
| Electrical & Instruments | ||||
| Electrical System |
12-volt lead acid, group size U1, with 300 minimum CCA at 0° F and 34 minutes reserve capacity at 85° F/25 amps draw. 50 amp alternator. Seat switch. Harness terminals and fuse slot available for optional lights installation. |
12-volt lead acid, group size U1, with 300 minimum CCA at 0° F and 34 minutes reserve capacity at 85° F / 25 amps draw. 50 amp alternator. Seat switch. Harness terminals and fuse slot available for optional lights installation. |
Maintenance-free 12-volt battery with 585 minimum CCA at 0° F (-17.7° C) and 95 minutes minimum reserve capacity at 85° F (29.4° C). 60 amp alternator, circuit fused at 60 amps. Seat switch. High temperature engine shut down. Harness terminals, fuse slot, and console switch location available for optional lights installation. |
Maintenance-free 12-volt battery with 585 minimum CCA at 0° F (-17.7° C) and 95 minutes minimum reserve capacity at 85° F (29.4° C). 60 amp alternator, circuit fused at 60 amps. Seat switch. High temperature engine shut down. Harness terminals, fuse slot, and console switch location available for optional lights installation. |
| Gauges/Instrumentation |
Hour meter, low oil pressure warning light. |
Infocenter™. Onboard LCD shows gages, alert/faults, service reminders, electrical system diagnostics, low oil pressure, alternator, engine hours, engine rpm, voltage, functional control status, parking brake status, reel speed setting, backlap control. Clip control setting. |
InfoCenter™: Onboard LCD shows gauges, alerts/faults, service reminders, electrical system diagnostics, low oil pressure, alternator, engine hours, engine rpm, voltage, functional control status, parking brake applied, reel speed setting, backlap control. Clip control setting. |
InfoCenter™: Onboard LCD shows gauges, alerts/faults, service reminders, electrical system diagnostics, low oil pressure, alternator, engine hours, engine rpm, voltage, functional control status, parking brake applied, reel speed setting, backlap control. Clip control setting. |
| Lighting | — | Optional | — | — |
| Dimensions & Weight | ||||
| Height |
205 cm (80.83") |
205 cm (80.83") |
205 cm (80.83") |
205 cm (80.83") |
| Overall Width |
179 cm (70.62") with reels |
180 cm (70.84") with reels |
179 cm (70.62") with reels |
180 cm (70.84") with reels |
| Transport Width |
Outside at Tires: 154.94 cm (61") Outside at Reels: 179 cm (70.62") |
Outside at Tires: 154.94 cm (61") Outside at Reels: 180 cm (70.84") |
Outside at Tires: 154.94 cm (61") Outside at Reels: 179 cm (70.62") |
Outside at Tires: 154.94 cm (61") Outside at Reels: 180 cm (70.84") |
| Product Length |
249 cm (98") |
249 cm (98") |
249 cm (98") |
249 cm (98") |
| Wheelbase |
119 cm (47") |
119 cm (47") |
123 cm (48.6") |
123 cm (48.6") |
| Ground Clearance |
11.4 cm (4.5") |
11.4 cm (4.5") |
11.4 cm (4.5") |
11.4 cm (4.5") |
| Overall Cutting Width | — | — | 150 cm (59") | — |
| Safety & Compliance | ||||
| Safety/Operator Safety |
Sound level of 80 dB(A) at operator’s ear under normal conditions. |
Sound level of 80 dB(A) at operator’s ear under normal conditions. |
Sound level of 84 dB(A) at operator’s ear under normal conditions. |
Sound level of 84 dB(A) at operator’s ear under normal conditions. |
| Accessories | ||||
| Optional Accessories |
Off-Greens Kit (Anti-Bobbing), Tri-Roller Kit, Spiker Kit, 3WD Kit, Leak Detector, Light Kit, Seat Kit (Standard or Premium), Armrest Kit (Standard or Premium), Hydraulic Oil Cooler Kit (Gas or Diesel), 2WD ANSI-compliant Weight Kit (Gas or Diesel), 3WD ANSI-compliant Weight Kit (Gas), Spark Arrestor Kit (Gas or Diesel), Canopy, Utility Bag Kit, Seat Cover, LH Armrest, Wireless Hour Meter |
Off-Greens Kit (Anti-Bobbing), Tri-Roller Kit, Spiker Kit, 3WD Kit, Leak Detector, Light Kit, Seat Kit (Standard or Premium), Armrest Kit (Standard or Premium), Hydraulic Oil Cooler Kit (Gas or Diesel), 2WD ANSI-compliant Weight Kit (Gas or Diesel), 3WD ANSI-compliant Weight Kit (Gas), Spark Arrestor Kit (Gas or Diesel), Canopy, Utility Bag Kit, Seat Cover, LH Armrest, Wireless Hour Meter |
Off-Greens Kit (Anti-Bobbing), Tri-Roller Kit, Spiker Kit, 3WD Kit, Leak Detector, Light Kit, Seat Kit (Standard or Premium), Armrest Kit (Standard or Premium), Hydraulic Oil Cooler Kit (Gas or Diesel), 2WD ANSI-compliant Weight Kit (Gas or Diesel), 3WD ANSI-compliant Weight Kit (Gas), Spark Arrestor Kit (Gas or Diesel), Canopy, Utility Bag Kit, Seat Cover, LH Armrest, Wireless Hour Meter |
Off-Greens Kit (Anti-Bobbing), Tri-Roller Kit, Spiker Kit, 3WD Kit, Leak Detector, Light Kit, Seat Kit (Standard or Premium), Armrest Kit (Standard or Premium), Hydraulic Oil Cooler Kit (Gas or Diesel), 2WD ANSI-compliant Weight Kit (Gas or Diesel), 3WD ANSI-compliant Weight Kit (Gas), Spark Arrestor Kit (Gas or Diesel), Canopy, Utility Bag Kit, Seat Cover, LH Armrest, Wireless Hour Meter |
| Comfort & Operator Station | ||||
| Armrests | — |
Optional |
— | — |
| Cup Holder | — |
Standard |
— | — |