Home » Shop » Mowers » Walk Behind Mowers » Walk Behind CL75

Walk Behind CL75

$9,305 Incl. GST

CL75 is a hydrostatic walk-behind mower is perfect for dealing with challenging areas of your property, including high grass, weeds and bush. The cutter deck’s front aperture lifts up automatically when entering high vegetation without crushing it down, considerably increasing the efficiency of the cut. Features of the CL75 include:

  • Shock-resistant swinging tip steel blades
  • Rear discharge
  • Honda GXV340 OHV petrol engine
  • Fabricated steel cutter deck
  • Great on slopes
  • Easily adjustable cutting height.

Sold exclusively through dealers – click here to find your local stockist

The engine’s manual recoil start is easy and reliable thanks to the clever design of the camshaft, which, during start-up, opens the exhaust valve slightly to decompress the engine. The engine itself is equipped with a lubrication pump allowing the machine to work on slopes without damaging the engine.
For cleaning the underside of the cutter deck the CL75 can be easily placed in a vertical position by simply placing the handlebar on the ground. Maintenance and cleaning of the cutting deck is easily accessible.
Belt tension of the cutting deck is self-adjusting; there’s also a parallelogram lift system, that regulates the cutting deck’s height, and this system gives the belt’s reliability as well as the longevity over the time along with the belts and bearings.
All components, from the simplest to the most complex, are of a high quality standard. Chassis, handlebar, cutting deck, everything is built by Grillo in Italy by using only premium materials and cutting edge technology.
CL75, as with all Grillo products, was designed and built to last and more importantly to retain its value for many years. All Grillo products are distributed and serviced by a widespread Grillo specialist dealer network.


The CL75 hydrostatic walk-behind mower is suitable for high grass, weeds and bush.

The cutting deck blades tips are moulded with a special profile so to reduce noise to the maximum and guarantee an excellent quality cut. With a maximum cutting height of 150mm it is ideal coping with very uneven ground avoiding accidental bumps on the soil. The cutting deck’s small front tyre is solid, i.e. puncture-proof!

CL75 has a perfect weight distribution and a low centre of gravity. The result is perfect balance!

It’s possible to hold the handlebars with one hand whilst working; this allows the adjustment of the drive and engagement of reverse gear by a handy lever. When cutting on slopes, near trees and obstacles or if you are cutting in coppices and bushes near low branches , adjusting the grass cutter’s drive so easily is a major advantage!  The handlebar has a double adjustment capability – height adjustment, in order to meet the operators’ requirements, and lateral adjustment to make cutting easier in difficult areas such as under low positioned branches or in the presence of obstacles.

Also under extreme conditions, such as extremely steep slopes and uneven ground, mowing is easy thanks to 4 ply wheels mounted on ball bearings. CL 75’s transmission is hydrostatic with differential lock. It’s possible to progressively adjust the speed by means of a lever on the handlebar from 0 to 6 km/h and in reverse gear up to 3,5 km/h.

  • Engine:  Honda GXV340 OHV
  • Start: – recoil starter
  • Fuel: – petrol
  • Displacement:  337 cc, 1 Cylinder
  • Power: 8.9 HP (6.6 kW) @ 3300 rpm
  • Torque:  21.6 Nm @ 2500 rpm
  • Air cooled
  • Consumption: 2.3 Litres per hour
  • Dry air filter with interchangeable filter cartridges .
  • Fuel tank capacity:  2.6 Litre
  • Drive: – hydrostatic transmission
  • Traction: – 2WD
  • Cutting type:  rear discharge with front swing opening
  • Cutting configuration: 1 rotating blade with 2 shockproof floating blades
  • Cutting width:  – 78 cm (31″)
  • Cutting height: – from 5 to 15cm continuously and rapidly adjustable by means of a crank lever
  • Peripheral blade speed: – 74 m/s
  • Differential locking: – manual engaged differential lock
  • Drive wheels: – 4 ply tractor wheels (4.00-8)
  • Front wheel:  – 8×3.00-4 puncture-proof wheel
  • Speed: – continuously variable from 0 to 6 km/h, reverse gear from 0 to 3,5 km/h
  • Parking brake:  – differential with locking device by lever action
  • Handlebar: – by means of a rapid height and lateral adjustment
  • Mowing capacity per hour (indicative):- 2500 m2/hr
  • Length:  2150 mm
  • Width:  845 mm
  • Height:  1050 mm
  • Weight: 140 kg
  • Item no: 8Y17R

Additional information



Product Video

Contact Us to get a Tailored Quote

We'd be happy to provide you with a Quote for a brand new Walk Behind CL75 including all the accessories you're after and delivery costs!

Let us know your contact details and we'll be in contact really soon.