Looking for a workhorse mower that’s easy to operate and gets the job done faster? Check out the Toro® Z Master® 7500-D. Maximum productivity with a rear discharge 152cm (60″) commercial cutting deck. It delivers all the speed and maneuverability of a zero-turn, along with the superior quality of cut you expect from Toro.
Toro Z Master 7500-D Series | 152cm (60") Zero Turn Mower
$45,919 incl. gst
Total amount payable $0.00 which includes $0.00 of interest.
Fixed rate of interest 9.9% p.a.
This is an indicative rate. Apply to find out what your personal rate could be.
Disclaimer: Any calculations made by this calculator are intended to be used as a guide only and is based on a loan of . Loan establishment fee $380. Personal Property Securities Register fee of $10.35 Monthly maintenance fee of $7.54.
Parkland Products Ltd does not accept any responsibility for any loss, costs, or liability directly or indirectly incurred by persons who rely on any amount calculated by this calculator. our actual interest rate may range from 9.90% to 21.90% pa. This means your repayments may differ depending on your financial circumstances. Rates and fees Offer of finance is subject to terms and conditions, lending criteria, responsible lending inquiries and checks.
Rates and fees
Offer of finance is subject to terms and conditions, lending criteria, responsible lending inquiries and checks.
Powered by a Yanmar diesel engine, this mower is packed with power to tackle the toughest mowing jobs.
The floor pan and deluxe suspension seat are iso-mounted to reduce vibration. That results in a better operator experience and more productivity.
Save on maintenance with extended service intervals and a deck design that uses up to four matching blades. The mower is also backed by a 5-year, 2,000-hour warranty (first two years no-hour-limit).
Choose the right operating mode for mowing conditions, saving fuel costs while maintaining top-level performance with our Horizon™ Technology.
Cools quickly for enhanced durability and performance.
| Air Filter | Heavy-Duty Canister Air Cleaner Air Filtration System with Electronic Vacuum Sensor |
| Anti Scalp Wheels | 4 Standard, 2 Side Skids (on 72028 model) 6 Standard (on 72065 model) |
| Armrests | Standard |
| Blade Tip Speed | 5,547 m/min (18,200 ft/min) |
| Blades | 3 blades at 52cm (20.5") length |
| CARB Compliant | Yes |
| Caster Tires | 38.1 cm x 15.2 cm - 15.2 cm (15" x 6" - 6") Flat-Free Semi-Pneumatic |
| Clutch | Wet Disc |
| Deck Design | 7 Gauge Steel TURBO FORCE® w/ Bull-Nose Bumper |
| Deck Size | 152 cm (60") |
| Discharge Chute | Rear |
| Drive System | 17.84 cu in Hydro-Gear HGM-H Motors with 18 cc Kanzaki® Pump |
| Drive Tires | 66 cm x 30.5 cm - 30.5 cm (26" x 12" - 12") |
| Engine Brand | Yanmar |
| Floor Pan | Flip-Up, Iso-Mount |
| Foot Operated Height of Cut | Hydraulic with Rocker Switch |
| Forward Ground/Transport Speed | Up to 20.1 kph (12.5 mph) |
| Front Bumper | Reinforced Bull-Nose |
| Fuel Capacity | 45.5 L (12.5 gal.) |
| Fuel Type | Diesel |
| Height of Cut | 2.5 - 14.0 cm (1.0" - 5.5") |
| Hour Meter | Horizon™ Technology |
| Number of Blades | 3 |
| Product Features | Anti-Scalp Rollers, Cup Holder, Deck Lift Assist, Electric Start, Foot Operated Height of Cut, Horizon System, Rear Discharge |
| Roll-Over Protection System (ROPS) | Standard |
| Seat | Deluxe Suspension (Iso-Mount, Flip-Up) |
| Spindle Bearing | Maintenance-free |
| Spindle Housing | 22.9 cm (9") Diameter Cast Aluminum |
| Spindle Shaft | 2.5 cm (1") Heavy-Duty |
| Start Type | Electric |
| Steering Controls | 4.1 cm (1-5/8") Diameter Grips; Adjustable, Dampened |
| Storage Compartment | Standard |
| Terrain Type | Rough Terrain |
| Weight | 861.8 kg (1,900 lbs) |
You will need your Serial # to search for Parts, Manuals, Accessories, Specifications and Product Details on Toro.com .
ToroParts for Model: 72028, 72065 Need Help? Contact Us Find your Serial Number location
No products in the cart.
